Tag Archives: Bitcoin miner

How to find out the IP address of your crypto miner

30 Comments 41559 Views6

How to scan out the configuration IP address of the miner
This is a guide for how to find out the IP address of the miner. There are several ways to get the IP address of your miner:

  • Find the IP address in your Router Admin Dashboard
  • Use IP Scanning Software
  • Use Self IP Report

We will introduce them one by one in this tutorial. We will take bitcoin miner as an example which applies equally to other cryptocurrency miners, such as litecoin miners, dash miners etc.

Continue reading

Evaluation on INNOSILICON T2T-32T Bitcoin Miner

2 Comments 565 Views1

Evaluation on INNOSILICON T2T 32TH Bitcoin Miner IMG 46

Being established in 2006, Innosilicon owns 12 years of experience in IP/IC development and design. Recently, it shifts the focus to the development of cryptocurrency mining devices and has introduced multiple types of ASIC miners based on the algorithms of SHA256, Scrypt, X11, CryptoNight, Blake256, Blake2B, Equihash and CryptoNight. The machines have covered the algorithms of all mainstream cryptocurrency.

INNOSILICON introduced and started shipment of model T2T-32T, the good tool for bitcoin mining, in early September, 2018. Today, this miner becomes the focus of EastShore and we have made the evaluation on this T2T Bitcoin miner as follows.

Continue reading

How to upgrade the firmware for a bitcoin miner

7 Comments 11023 Views0

upgrade firmware of bitcoin miner

Sometimes, your miner may stop mining because of firmware issue of the controller. In that case, you can fix the issue by upgrading the firmware. And also in some other cases, you may want to upgrade the firmware of your miner to the latest version so that your miner can get a better performance.

In this tutorial, we will show you how to upgrade the firmware of a bitcoin miner.

Continue reading

Evaluation on Antminer S9 Hydro Water-Cooling Bitcoin Miner

No Comments 389 Views1

Evaluation on Antminer S9 Hydro Water-Cooling Bitcoin Miner IMG N01

Recently, Bitmain has introduced a new miner based on the SHA256 algorithm, Antminer S9 Hydro, which immediately attracted widespread attention ever since. We finally witness the mass-produced water-cooling miner in the real sense! S9 Hydro miner is suitable for BTC, BCH, DGB and other SHA256 currencies. It adapts to Antminer APW5 silent power supply with low temperature, low noise and immunity to dusts.

Continue reading

Evaluation on Bitcoin Miner Antminer S15

No Comments 475 Views4

Evaluation on Bitcoin Miner Antminer S15 IMG 52

As a scientific company dedicating to high-speed, low-power customized chip design and development, Bitmain has successfully designed and mass-produced multiple models of ASIC customized chips and all-in-one systems. Bitmain was established in 2013 and introduced the first-generation bitcoin miner of Antminer series, Antminer S1, in the same year. With over five years of development, the bitcoin miner of Antminer series has undergone iterations of multiple models of S1, S2, S3, S4, S5, S7 and S9. The latest models are S15 and T15, which were on sale on November 8, 2018.

Antminer S15 adopts a brand-new 7nm chip manufacturing technology and the official website evaluates model S15 as Long-term Mining, Energy Efficiency, which emphasizing the features of “high performance with durability and energy efficiency with less power consumption”. According to the parameters on the official website, Antminer S15 has two types of built-in mining modes: High-Performance Mode and Energy-Saving Mode. As per the official parameters, the energy/hash ratio is 57 J/T in High-Performance Mode and 50 J/T in Energy-Saving Mode. Compared to the bitcoin miners on current market, such an energy/hash ratio has set a record high.

Continue reading

Evaluation on Ebit E9.2 Bitcoin Miner

No Comments 366 Views0

Evaluation on Ebit E9.2 bitcoin Miner IMG N01

The Ebit miner is the high-hashrate bitcoin miner released by Ebang Communication Co.,Ltd, a NEEQ-listed company in Zhejiang Province, China. The earliest model of this series of miners was released in 2016 with self-developed bitcoin mining chips.

The latest version of Ebit E9.2 bitcoin miner for this evaluation can reach 12TH/s at the energy consumption ratio of 140W/T. Now, EastShore will bring you the latest evaluation as follows.

Continue reading

Install AsicBoost Firmware with Ultra-detailed Graphic Instructions

1 Comment 378 Views0

Install AsicBoost Firmware with Ultra Detailed Graphic Instructions IMG 23

Bitmain has recently released its firmware for the popular Antminer S9 to enable what is called “overt AsicBoost”. What is AsicBoost? In short, AsicBoost is best described as a “mathematical trick”. Instead of taking a huge amount of computation, miners can use the technique to whittle down their choices of potential hashes that enable them to solve a puzzle and claim bitcoin’s rewards.
Continue reading

Tutorial: Antminer S17/S17 Pro the Newest 7nm Bitcoin Miner

1 Comment 388 Views1

Tutorial for Antminer S17/S17 Pro the Newest 7nm Bitcoin Miner IMG 01

This tutorial is meant for the Antminer S17/S17 Pro which is a bitcoin miner manufactured by BITMAIN. The Antminer S17 series bitcoin miner is equipped with Bitmain’s second-generation 7nm chip BM1397. The energy efficiency ratio is as low as 39.5J/T in low power mode. The Antminer S17 series bitcoin miner is Bitmain’s most competitive SHA256 mining machine to date, supporting BTC, BCH and other SHA-256 crypto currencies.

We will take Antminer S17 Pro as an example to show settings which apply equally to Antminer S17.

Continue reading

  • Page 1 of 3
  • 1
  • 2
  • 3