The Antbox is the product of Bitmain released in March 2018. It is basically a small mining farm fits into a container. It can hold as many as 324 units of S9 miner. This product saves the trouble of building a mining farm from scratch.
We visited the manufacturer in Shenzhen, in this piece, we will reveal more details about this product.
The Antminer models are most popular cryptocurrency mining devices. And setting-up different Antminer models is pretty much the same. We will present a general tutorial for setting up Antminer models.
We will take S9 as an example to show setting up and troubleshooting which apply equally to other Antminer models.
This is a guide for how to find out the IP address of the miner. There are several ways to get the IP address of your miner:
- Find the IP address in your Router Admin Dashboard
- Use IP Scanning Software
- Use Self IP Report
We will introduce them one by one in this tutorial. We will take bitcoin miner as an example which applies equally to other cryptocurrency miners, such as litecoin miners, dash miners etc.
On October 25th, the FPGA miner AGPF SK1 released new firmware and the mining workers with this wireless silent miner can experience the new upgraded system now.
In this article, we will explain the Miner Status page of Antminers. For setting rigs up, please refer to our tutorial: www.eastshore.xyz/tour/
In this tutorial, we will introduce how to reset Antminer by taking the S9 as an example. It applies equally to other models of Antminer.
There are three ways to reset Antminers.
Sometimes, your miner may stop mining because of firmware issue of the controller. In that case, you can fix the issue by upgrading the firmware. And also in some other cases, you may want to upgrade the firmware of your miner to the latest version so that your miner can get a better performance.
In this tutorial, we will show you how to upgrade the firmware of a bitcoin miner.
When the miner suffers from some serious problems, we may consider the solution of reburning the mining system image file for the miner. We’d like to show you how to reburn the image in this tutorial.
Note: We do not recommend reckless attempt of reburning the mining system image to solve the problems occurred during the miner operation.
In September 2018, cryptocurrency hardware manufacturer Canaan announced a novel product-a mining heater. According to official specifications: the product with the model name A851H, has a hash speed of 14.5TH/S@1450w/h, the efficiency ratio is 100w/T and it integrates 104 A3210M chips of 16nm.
In this review we will show as many details as possible.
On July 24th, Jonas Schnelli, a member of bitcoin core development team, failed in online shopping and he angrily asked BitPay why his order was rejected on Twitter.